WELDLESS CHAIN
WELDED CHAIN
CARGO CONTROL
TRAILER CHAIN
ACCESSORIES
ASSEMBLIES
WIRE ROPE
High Test Grade 43
AGRICULTURE
CONSTRUCTION
MINING
TRUCKINGAvailable in High Carbon Steel
High-carbon steel chain that provides higher tensile strength and resistance to wear than general utility low-carbon steel chain, making it ideal for most tie down applications. High tensile strength and wear resistance make Grade 43 a better choice for heavy-duty trucking, major construction activities, mining and logging applications.
Packaging Options
Poly Bag
Smaller quantities of product, transparent packaging.
Carton
Smaller quantities, sometimes double packaged in “Master Packs” for extra protection during transit.
Stylette Reel
Various sizes, used for continuous lengths, sometimes double packaged in “Master Packs” for extra protection during transit.
Plastic Pail
Plastic pail, used for continuous lengths.
Drum
Fiber drums used for longer, continuous lengths and cut lengths, packaged in bulk.
Pallet Box
Pallet sized box, used for longer, continuous lengths and cut lengths, packaged in bulk.
Product Details
High Test Grade 43 Chain Product Details
Instructions & Cautions
WORKING LOAD LIMITS: The maximum load (in pounds) which should never be applied
to chain, even when the chain is new and the load is uniformly applied in direct tension to a
straight, untwisted length of chain. The term “working load limit” contains no implication
of what load the chain will withstand if any of the above factors are changed.
Any chain can be subject to wear, twisting, misuse, overloading, intentional alteration and
corrosion. These and other usage variables may cause a reduction in their working load
limits. It is, therefore, important to regularly inspect all products to determine that they are
safe for continued use.
PROOF TEST: The load (in pounds) to which the chain was subjected, in the as-manufactured condition prior to the time it left the factory. Under this test, a load has been applied in direct tension to a straight length of chain with a uniform rate of speed on a standard chain testing machine. The sole purpose of this test is to discover defects in the material or manufacturing process.
Every foot of Proof Coil (Grade 30), High Test (Grade 43) and Transport (Grade 70) chains are proof tested. Where attachments such as hooks or rings are desired for use with chain in sustaining loads, care should be taken to select the attachments of the type, grade and size compatible with the chain with which the attachments are intended to be used.
GENERAL WARNING: Low and high carbon steel, weldless and welded chain, and accessories made from assorted metals are intended to be used in tension or pull applications and are not to be used for lifting or hoisting purposes or when their failure is likely to cause damage to property or persons. Jerking or acceleration in the rate of application of a load multiplies the stress on the chain very rapidly and should be avoided.
PROPOSITION 65 WARNING:
California's Proposition 65 entitles California consumers to special warnings for certain products that contain chemicals above certain threshold levels. Some Perfection Chain products may contain chemicals that fall under
The general Proposition 65 notice is as follows for products that are made from Brass or contain Brass or Nickel plating:
WARNING: This product contains chemicals, including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The general Proposition 65 notice is as follows for vinyl chain and rope:
WARNING: This product can expose you to Di(2-ethylhexyl) Phthalate (DEHP), which is known to the State of California to cause cancer & birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
PROOF TEST: The load (in pounds) to which the chain was subjected, in the as-manufactured condition prior to the time it left the factory. Under this test, a load has been applied in direct tension to a straight length of chain with a uniform rate of speed on a standard chain testing machine. The sole purpose of this test is to discover defects in the material or manufacturing process.
Every foot of Proof Coil (Grade 30), High Test (Grade 43) and Transport (Grade 70) chains are proof tested. Where attachments such as hooks or rings are desired for use with chain in sustaining loads, care should be taken to select the attachments of the type, grade and size compatible with the chain with which the attachments are intended to be used.
GENERAL WARNING: Low and high carbon steel, weldless and welded chain, and accessories made from assorted metals are intended to be used in tension or pull applications and are not to be used for lifting or hoisting purposes or when their failure is likely to cause damage to property or persons. Jerking or acceleration in the rate of application of a load multiplies the stress on the chain very rapidly and should be avoided.
PROPOSITION 65 WARNING:
California's Proposition 65 entitles California consumers to special warnings for certain products that contain chemicals above certain threshold levels. Some Perfection Chain products may contain chemicals that fall under
The general Proposition 65 notice is as follows for products that are made from Brass or contain Brass or Nickel plating:
WARNING: This product contains chemicals, including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The general Proposition 65 notice is as follows for vinyl chain and rope:
WARNING: This product can expose you to Di(2-ethylhexyl) Phthalate (DEHP), which is known to the State of California to cause cancer & birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
