PCP can produce hooks from a wire diameter of .062 to .375 out of a variety of materials. The hook shape is not limited to the shapes shown on this page. Maximum strength is achieved by closing the hook once attached.
Bright Galvanized, Zinc Plated, Nickel, Polished Brass
*Minimum order quantity: $200
WARNING: Chain and accessories shown are not to be used for overhead lifting or for hoisting applications. Do NOT exceed working load limits.
Smaller quantities of product, transparent packaging.
Smaller quantities, sometimes double packaged in “Master Packs” for extra protection during transit.
Various sizes, used for continuous lengths, sometimes double packaged in “Master Packs” for extra protection during transit.
Plastic pail, used for continuous lengths.
Fiber drums used for longer, continuous lengths and cut lengths, packaged in bulk.
Pallet sized box, used for longer, continuous lengths and cut lengths, packaged in bulk.
PROOF TEST: The load (in pounds) to which the chain was subjected, in the as-manufactured condition prior to the time it left the factory. Under this test, a load has been applied in direct tension to a straight length of chain with a uniform rate of speed on a standard chain testing machine. The sole purpose of this test is to discover defects in the material or manufacturing process.
Every foot of Proof Coil (Grade 30), High Test (Grade 43) and Transport (Grade 70) chains are proof tested. Where attachments such as hooks or rings are desired for use with chain in sustaining loads, care should be taken to select the attachments of the type, grade and size compatible with the chain with which the attachments are intended to be used.
GENERAL WARNING: Low and high carbon steel, weldless and welded chain, and accessories made from assorted metals are intended to be used in tension or pull applications and are not to be used for lifting or hoisting purposes or when their failure is likely to cause damage to property or persons. Jerking or acceleration in the rate of application of a load multiplies the stress on the chain very rapidly and should be avoided.